Product Introduction:
The characteristic of TBI ball linear guide rail is high positioning accuracy. When the linear slide rail moves, the friction force is very small, belonging to rolling friction. Therefore, only minimal power is needed to drive the platform. Due to the small friction force, the heat generated by friction is minimal. Compared with traditional sliding methods, it can significantly reduce the wear of the contact surface of the running rail, and can maintain high positioning accuracy, walking accuracy, and low wear for a long time.
Product features:
The high rigidity slide and track are designed with four directions of equal load, so for loads from all directions, they must have sufficient resistance strength and the ability to automatically adjust the center, allowing for large installation errors to make processing easier, and can be applied with sufficient preload to achieve high rigidity. Compared to traditional sliding systems, maintenance and upkeep are easier, and both involve scraping or grinding the running track surface. The wear caused by sliding often requires the machine to be re scraped or ground for a period of time, which is time-consuming and costly. Linear sliding rails have interchangeability, and if replaced or repaired, the walking accuracy of the machine can be restored.
Due to the contact between the slider and the track and the rolling point of the steel ball probe, the friction coefficient is extremely small and it is not easy to generate heat. Therefore, only a very small amount of power is required to drive the machine to run. Because the required driving force is small and the power consumption is low, it is more suitable for high-speed operation compared to sliding devices. Clearance free high Mechanical efficiency When preloading mode or working load is applied, the steel ball contacts at two points in the load direction, and differential sliding is small, so that good rolling movement can be obtained and efficiency can be improved.
Standard assembly without flange TRC-V
The TR series has very low friction during movement, and the thermal energy generated by the sliding block movement is also relatively low, which can greatly reduce the wear of the contact surface of the running track. It can maintain high positioning accuracy, walking accuracy, and low wear for a long time. However, due to the low friction, the driving force required to drive the machine is naturally small, and the power consumption is also low. The circulation part of the steel ball adopts a special patent design to improve its running trajectory, Effectively improving the smoothness of the slide rail assembly, making it more suitable for use in situations that require high-speed operation.